Please consider registering

sp_LogInOut Log In sp_Registration Register

Register | Lost password?
Advanced Search

— Forum Scope —

— Match —

— Forum Options —

Minimum search word length is 3 characters - maximum search word length is 84 characters

sp_Feed Topic RSS sp_TopicIcon
Marine Air Vector VCD18K/1
August 21, 2012
3:41 pm
New Member
Forum Posts: 1
Member Since:
August 21, 2012
sp_UserOfflineSmall Offline

My system runs but is not able to cool the cabin in the day time the temperature rises from 78 in the early morning to 83 in the middle of the day 

They just replace the High pressure switch and the R22 was replaced

it did work good for a few days and one day the compressor stop running, the blower and pump keep on running, I touched the compressor and it seemed it was hotter than usual, after it cool off it started again but was not able to keep the cabin cold. I can see that he is drawing around 18 amps when running

any advise