Please consider registering
guest

sp_LogInOut Log In sp_Registration Register

Register | Lost password?
Advanced Search

— Forum Scope —




— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

sp_Feed Topic RSS sp_TopicIcon
fan motor not working replaced notor has 4 wires old one has 2
May 22, 2012
2:32 pm
rudy1k
New Member
Members
Forum Posts: 2
Member Since:
May 22, 2012
sp_UserOfflineSmall Offline

i have cruise air system with marineair 3 knob control 240 volts. an older system.

i had to replace the blower motor asssembly including the motor, witch was 240 volts with 2 wire system.

the new motor came with a capacator and for type wires blue. black,brown,yellow/green  for ground.

the compressor starts and cool but the blower do not start. i recheched the wiring diagram from the factory brown to capacter.

black gets t with line 1 and blue conects with line 2 i assumed the the 2 old lines that came to the blower are line 1 and 2.

that did not start the blower motor any suggetstio how to tacle this issue the compressor is cooling and working fine