Please consider registering

sp_LogInOut Log In sp_Registration Register

Register | Lost password?
Advanced Search

— Forum Scope —

— Match —

— Forum Options —

Minimum search word length is 3 characters - maximum search word length is 84 characters

sp_Feed Topic RSS sp_TopicIcon
July 11, 2012
9:34 am
New Member
Forum Posts: 2
Member Since:
July 9, 2012
sp_UserOfflineSmall Offline

Dear friends, I am sorry about Steve passing away, my condolences.  I am writing reporting a problem with the WAFH16 condensing unit that I replaced the compressor 2 years ago.  The compressor I bought came with a starting capacitor.  I installed the one that came with the unit and use the old running capacitor.  I also replaced the starting relay, and followed the diagram for the wiring.  The compressor takes a lot of current after initial starting until the 25 amp breaker goes off.  After 2 or 3 attempts, it starts and continue with no problem.  I am using the rotary knobs, not the original, but the one with the black face plate.  I wonder if any of you friends out there knows the part # of the starting, running and start relay of the original unit so I can order them?  This unit is 34 years old.  Came in a Bertram 38 saloon unit.  Thank you in advance.