Please consider registering
guest

sp_LogInOut Log In sp_Registration Register

Register | Lost password?
Advanced Search

— Forum Scope —




— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

sp_Feed Topic RSS sp_TopicIcon
norcold de0041?
February 22, 2012
7:26 pm
Brad
New Member
Forum Posts: 2
Member Since:
February 17, 2012
sp_UserOfflineSmall Offline

Hi bcclew,

 

You don't need a switch between the breaker and the unit. All units should have a power switch on them. Check your manual. Some switch off by rotating the thermostat fully CCW to a detent.

Your unit will shift automatically between a/c or d/c. You should have the MAIN a/c or dc breakers off when connecting to or disconnecting from either source. you can leave the individual breakers for the Norcold unit on.

10 AWG multi-strand wire will be fine for that small load at that length.

 

Good luck,

 

Brad

Brads Marine a/c. 

February 20, 2012
4:48 pm
bcclew
New Member
Members
Forum Posts: 1
Member Since:
February 20, 2012
sp_UserOfflineSmall Offline

hey everybody when hooking up frig to 110 do i need a seperate switch between power braker ref?and the same?for the 12volt side?also when you are on 12 v and switch to shore power must the 12v supply be turned off  first?or will it switch automatic?the same?from switching from shore power to 12v thanks ps what size wire for 12v about 10 ft run? thanks again bcclew