Replacement board for 2PRP pump relay-Marine Air Part # 224110091 6 PRP circuit board Includes thermal compound packet for retrofit Call for details and shipping options 727-365-6123
Replacement board for 2PRP pump relay-Marine Air Part # 224110090 2 PRP circuit board Includes thermal compound packet for retrofit Call for details and shipping options 727-365-6123
Two Unit Solid State Relay,224110040 (2PRP) Two Unit Pump Relay Two Unit Solid State Relay 115V/230V 1phase Pump activation for two units supplied by one seawater pump Call for details and shipping options 727-365-6123
224110050 (6PRP) 6 Unit Solid State Pump Relay, 115V/230V 1phase Marine Air Pump Relay 2 Units off One Pump 115V or 230V AC Call for details and shipping options 727-365-6123
Without water flow….You have NO cooling !
Service people on the docks (at least the better ones) can walk down the dock during the summer and tell which boats they are likely to be getting a call from next just by the flow of water (or lack of) going overboard on each boat….Lack of seawater flow can cause other problems besides loss of cooling…
I notice from the Google searches…That A/C System Icing is a search done often.. Though there can be many reasons for system icing…There are a few that the DIY boater can rule out before calling the service guy ( I can discuss other reasons in the forum but here are a few of the basic answers) Direct Expansion [...]
If you can get a good look at the aluminum fins…Check to see that they are not also clogged…If they are…That’s another story, and it’s probably time to call you’re A/C guy to clean them because he has access to cleaning solutions that work real well for this…and also likely has the equipment to do the job right…With less mess…