Hi Steve, motor/pump on a 1995 47' bayliner, serves 3 units….throw curcuit breaker, pops, than nothing, remove motor/pump, replace capacitor and start switch, nothing, put drill and socket to motor and it runs, don't know if this problem gets solved, will units tell motor/pump to run, if not, will wire direct to breaker, what could be wrong with motor, what can I relace it with…..no burnt smell……thanks, bob

Post edited 11:52 pm – July 20, 2010 by Steve Pooler

Bob~

I had to read your post again to see if I could help….But…

If you tell me the size of all three units on your Bayliner…I can suggest what pump to buy, but your description with no voltage checks tell me nothing really.

Throw what breaker ? Which breaker pops ?

Drill & socket to motor & it runs ???…Well yeah, with another motor driving it what do you expect ?

Help me out here…

Steve~