• 224110040 $245.00 (2PRP) Two Unit Solid State Relay, 115V/230V 1phase

• 224110050 $275.00 (6PRP) Two To Six Unit Solid State Relay, 115V/230V 1phase

Cruisair Pump Relays and Triggers

• PR3X $164.00 Pump Relay, 115/230V, Up to 3 Triggers (not included)

• PR3X-2 $215.00 Pump Relay, 115/230V, with two 115V Triggers

• PR3X-2C $215.00 Pump Relay, 115/230V, with two 230V Triggers

• PR3X-3 $240.00 Pump Relay, 115/230V, with three 115V Triggers

• PR3X-3C $240.00 Pump Relay, 115/230V, with three 230V Triggers

• PR8X $199.00 Pump Relay, 115/230V, Up to 8 Triggers (not included)

• PR8X-4 $305.00 Pump Relay, 115/230V, with four 115V Triggers

• PR8X-4C $305.00 Pump Relay, 115/230V, with four 230V Triggers

• PR8X-5C $330.00 Pump Relay, 115/230V, with five 230V Triggers

• PR8X-6C $355.00 Pump Relay, 115/230V, with six 230V Triggers

• PR8X-7C $380.00 Pump Relay, 115/230V, with seven 230V Triggers

• TR115 $37.00 Relay Trigger, 115V

• TR230 $37.00 Relay Trigger, 230V

Note: Other repair parts are available…

Marine Air only offers a replacement board (which is everything needed but the box that houses it) no other parts are replaceable as they are all on the board itself.

Cruisair offers a replacement board & the seperate triac (the solid state relay) in addtion to the Triggers listed above.

FEATURES BENEFITS

Elite or Passport I/O displays Versatility in choice of displays with Passport I/O

Compact Display Footprint circuit board

Universal Symbols Less Space Required for BulkHead Mount

Air Sensor in the Display Eliminates Language Barrier Overseas

EC Compliant Enhanced Comfort Control in Living Quarters

Plastic Construction Approved for Export to Europe

Gold Connector Pin Contacts Will not oxidize or corrode in Marine Environment

Programmable Humidity Mode Keeps Cabin Dry when Vessel is not in Use

Other Programmable Features Allows System Customization for each Vessel

ELITE & PASSPORT I/O DIGITAL DISPLAYS

Item No….List Price…USD Description

• 222000210 $225.00 Display Only Elite Gray

• 222000211 $225.00 Display Only Elite White

• 222000200 $195.00 Display w/Bezel Compact I/O Passport Black

• 222000201 $195.00 Display w/Bezel Compact I/O Passport White

• 222000220 $190.00 Display Only Compact I/O Black

• 222000221 $195.00 Display Only Compact I/O White

• 222000226 $195.00 Display Only Dometic Brand I/O Black – for use with ENVIRO COOL/COMFORT Units

• 222000224 $15.00 Bezel, Adapter Passport I/O Black

• 222000225 $15.00 Bezel, Adapter Passport I/O White

• 228710002 $8.50 Black plastic bulkhead adapter for Passport I/O Display

• 4220020 $410.00 Passport I/O Circuit Board for Elite or Passport I/O

BEZELS

• 335440 $54.00 Bezel Metal Polished Gold

• 335441 $12.30 Bezel Poly Black

• 335442 $12.30 Bezel Poly Idea White

• 335443 $12.30 Bezel Poly Graphite Gray

• 335444 $49.00 Bezel Metal Black Chrome

• 335445 $43.00 Bezel Metal Slate Gray

• 335446 $44.00 Bezel Metal Bronze

• 335447 $39.00 Bezel Metal Black

• 335448 $38.00 Bezel Metal Ivory

• 335449 $38.00 Bezel Metal White

• 335511 $12.30 Bezel Poly Classica Idea White

• 335512 $12.30 Bezel Poly Classica Graphite gray

• 335513 $33.00 Bezel Metal Classica White

• 335514 $49.00 Bezel Metal Classica Polished Gold

• 335516 $32.00 Bezel Metal Classica Black

DIGITAL UPGRADE RETROFIT KITS

SELF-CONTAINED 3-KNOB UPGRADE TO ELITE OR PASSPORT I/O

• 222108000 $36.00 Retro Plate for 3 Knob to Passport I/O, Black (included in kit)

• 222108001 $35.00 Retro Plate for 3 Knob to Passport I/O, White (included in kit)

• 223100260 $655.00 Retrofit Kit, Self-Contained Elite Gray Horizontal

• 223100261 $670.00 Retrofit Kit, Self-Contained Elite Gray Vertical

• 223100262 $645.00 Retrofit Kit, Self-Contained Passport I/O, Black

• 223100263 $645.00 Retrofit Kit, Self-Contained Passport I/O, White

Note: Includes I/O control inside elec. box, harness with polarized plug, display, retrofit plate, black poly bezel (with Elite only), 15′ display cable, 7′ air sensor, manual, and quick reference card.

CENTRAL SYSTEM 3-KNOB UPGRADE TO ELITE OR PASSPORT I/O

• 223100210 $665.00 Retrofit Kit, Central System Elite Gray Horizontal

• 223100212 $630.00 Retrofit Kit, Central System Passport I/O, Black

• 223100213 $630.00 Retrofit Kit, Central System Passport I/O, White

Note: Includes I/O control inside elec. box, harness, display, retrofit plate, black poly bezel (with Elite only), 30′ display cable, 7′ air sensor, manual, and quick reference card.

ELITE RETROFIT COVER PLATES

• 293600422 $55.00 Retrofit Plate, MCP 3-Knob to Elite Horizontal, White

• 293600423 $55.00 Retrofit Plate, MCP 3-Knob to Elite Vertical, White

• 293600424 $55.00 Retrofit Plate, MCP 3-Knob to Elite Horizontal, Black

• 293600444 $55.00 Retrofit Plate, MCP 3-Knob to Elite Vertical, Black

• 293600455 $55.00 Retrofit Plate, Passport II to Elite Horizontal, Black\

Other retrofit kits are available if you have a older Marine Air Digital control such as the Passport II, or ECU Maxx that are no longer available…Please Call or E-mail for advise or pricing.

NEW FOR 2010

FEATURES BENEFITS

Elite or Passport I/O Display Versatility in choice of displays w/Passport I/O technology

High Velocity Blower Increased air flow with no motor overhang

Rust-free Molded Composite Drain Pan Never rusts and minimal standing condensate water

Blower Rotatable to Left or Right Hand Reduced installation time and SKU #’s

Built-in Isolation Mounting System Minimizes vibration to the mounting deck

State-of-the-Art Patented Technology Increased capacity & reduced Amperage

with compact size

Item No…List PriceUSD… Model No… Description

• 205561200 $1,995.00 VTD6K-410A 115V 6,000 BTU Turbo with 410A, 115V 60Hz

• 205563200 $2,100.00 VTD6KZ-410A 230V 6,000 BTU Turbo with 410A, 230V 60Hz

• 205562200 $2,100.00 VTD6KZ50-HV 410A 220V 6,000 BTU Turbo with 410A, 220V 50Hz

• 205561300 $2,155.00 VTD8K-410A 115V 8,000 BTU Turbo with 410A, 115V 60Hz

• 205563300 $2,185.00 VTD8KZ-410A 230V 8,000 BTU Turbo with 410A, 230V 60Hz

• 205562300 $2,240.00 VTD8KZ50-HV 410A 220V 8,000 BTU Turbo with 410A, 220V 50Hz

• 205561400 $2,365.00 VTD10K-410A 115V 10,000 BTU Turbo with 410A, 115V 60Hz

• 205563400 $2,380.00 VTD10KZ-410A 230V 10,000 BTU Turbo with 410A, 230V 60Hz

• 205561500 $2,445.00 VTD12K-410A 115V 12,000 BTU Turbo with 410A, 115V 60Hz

• 205563500 $2,460.00 VTD12KZ-410A 230V 12,000 BTU Turbo with 410A, 230V 60Hz

• 205561700 $2,575.00 VTD16K-410A 115V 16,000 BTU Turbo with 410A, 115V 60Hz

• 205563700 $2,605.00 VTD16KZ-410A 230V 16,000 BTU Turbo with 410A, 230V 60Hz

——————————————————————————

Join the forum discussion on this post

Due to new 2010 EPA regulations regarding the phase out of our long used R-22 A/C refrigerant systems…

Here’s what I can share at this point from the Cruisair/Marine Air perspective & what I have been told.

Self Contained R-22 units are no longer in production…sort of…

Since 417a is a drop in replacement for R-22 you can get the R-22 units (but they are shipping charged with R-417a)

We are told that the R-417a drop in replacement refrigerant for R-22 is 17% less efficient than the R-22 in the same unit (like running 60Hz equipment on 50Hz power)

So if you bought a new R-417a unit…You can evacuate the R-417a and re-charge that unit with R-22 to realize the same performance as a R-22 unit that was purchased before the production change…

You can also evacuate a older R-22 system & recharge with 417a…But the 17% performance drop still applies…

R-22 refrigerant should still be available for quite some time yet…But…The price will climb pretty quickly.

The new R-410a cannot be used in a R-22/R417a system even with evacuation…It’s not compatible with the oil in the 22 system & the pressures will run too high in that system (metering devise is not set for it either)

My distributor has about 3 months worth of sales of units with R-22 available, but after they are gone he will only stock the new R-410a units….And is now only ordering Self Contained unit with the new R410a.

Split or Remote systems are a whole different story…

One thing they are the same in is that none of the existing systems can run the new R-410a, but they can run the R-417a with the 17% drop in performance….but the problem is bigger with small split systems.

Typically the 16K & smaller split systems have always used piston type compressors as opposed to the rotary type that have been used in self contained units for many years now…

The reason for this is that the rotary type compressor does not lend itself well to long copper line runs…
Rotary crankcases don’t hold enough oil for the migration of oil with the refrigerant throughout the longer line runs in split systems…
It’s my understanding that the rotary can run out of oil before it has a chance to return with the refrigerant, and thus can ruin itself in a split system from lack of lubrication.

The compressor manufacturers are being forced to phase out production of the lower efficiency piston compressors by the EPA or whomever…

Scroll compressors would be a great alternative, but as of yet…The compressor manufacturers have not developed Scroll compressors in the smaller sizes that are required for our smaller Marine split systems (the larger than 16k marine units are using scrolls now)
I guess they figure the Marine market is too small to develop new small scrolls for, and that the rotary’s are fine for the home window unit market (which is what the the rotary’s were developed for)

I know that Dometic Cruisair/Marine Air has been testing small splits using rotary’s for quite some time now…So far they aren’t saying much…Hopefully we will get more info at the Miami show next month…

Until then…They are only offering the same piston type smaller split systems and shipping with R-417a (the drop in replacement for R-22) to meet the new regulations….The Larger splits (over 16K) will be available as either R-417a (mainly for replacements of the older R-22 units) or the new R-410a units, but to utilize R-410a condensing unit you must also change the air handler…No need for new copper tubing runs.

Who knows…We may end up not having split systems under 16K available in the future…

Steve~

I started this site last year to “put my feelers out”  about what owners and captains may want to learn and share about marine  a/c.

The support has been more than I ever expected…

So… My New Year resolution to you is expand the site we created…Because of your feedback I am going to begin adding to my store to allow you to order most of the common Marine A/C system items that I found you’ve needed,  but until the store is fully operational…As always I’m here for you to contact…

Some important information…Sadly…Due to EPA regulations there will be no more R-22 systems/units produced in 2010…

• If you need to replace a R-22 condensing unit in an existing system…You will need to purchase a R-417A unit, evacuate your R-22 (which you would do anyway) and re-charge the system with R-417A (drop in replacement for R-22)…No need to change the air handler.
• For new installations (split system or self contained) the systems have been re-designed to operate with environmentally friendly R-410A which operates at much higher pressures that the existing R-22 or R-417A systems…These R-410A units can Not be paired with the older air handlers.

Your local A/C guy will know what to do & have the equipment to make the change.

Your comments & feedback are always welcome & appreciated…I need things to help me write…So ask away…It does stir the thoughts…

Clean Sea Strainers to All, and to All a Good Year…Think of the A/C/Heat/ Refer Guy…He Does You…

Steve~

Unit model VRE16K-H (Rotary Compressor) 16,000 BTU 115 volt.

This unit new with control & cable would retail for over $3000.

$700.00 + Shipping…Price reduced for quick sale…$600 + Shipping

This system is priced lower than a digital control retrofit kit from Marine Air…It’s like you’re getting a 16K  A/C unit in good shape for nothing…

If local can demo on bench.

Welcome to our new Marine AC store.  Marine-AC.com is an authorized supplier of Dometic Corporations lines of Marine Air Conditioning and Refrigeration products including:

• Marine Air – Ideal for boats of all sizes, Marine Air climate systems from Dometic give that “large boat” feeling of comfort and luxury. Marine Air started building air conditioning systems for boats in 1977, and thousands of pleasure boats throughout the world are equipped with Marine Air Systems.
• Cruisair – Whatever type of boat you own, you deserve the unbeatable comfort and luxury of a Cruisair climate system. Cruisair was a pioneer of air conditioning systems for pleasure boats in the 1960’s and now, as part of Dometic Group, the Cruisair brand continues to represent innovative new products in the marketplace.
• Custom Cooling Units
• Cold Plate Refrigeration
• Accessories and Kits